Jump to the main content

Search Home DIY Online

Gravel, Mulch and Topsoil: How to Calculate Cubic Yards, Tons and Bags

Posted by Posted Topic: Outdoors

To find how much gravel, mulch or topsoil you need, multiply the area in square feet by the depth in feet (inches divided by 12), add a small allowance, and divide by 27 for cubic yards. Divide cubic feet by the bag size for bags. For gravel, multiply cubic yards by its weight; loose, dry gravel is listed at 2,565 lb per cubic yard, about 1.3 tons.

A wheelbarrow of mulch beside a pile of gravel and a shovel

Covered in the guide: How to Build a Deck: Permits, Footings, Framing and Finishing

How do you work out cubic yards, tons and bags?

Multiply the area by the depth in feet, add an allowance, and divide by 27 for cubic yards. Divide cubic feet by the bag size for bags, and multiply cubic yards by a weight per yard for tons of gravel.

This is part of planning outdoor builds such as those in our deck building guide. The gravel, mulch and topsoil calculator runs every step; this page shows the math behind it.

What is the area times depth formula?

Cubic yards = length (ft) × width (ft) × depth (in ÷ 12) ÷ 27. That is the formula Texas A&M AgriLife Extension publishes. Its example is a 10 × 10 ft bed with 3 inches of mulch: 100 × 0.25 ÷ 27 = 0.93 cubic yards, rounded up to 1 yard.

For odd shapes, split the area into rectangles and circles, work out each one and add them. A circle is 3.14 × radius².

How do you convert cubic yards to tons?

Multiply cubic yards by the weight of one cubic yard of that material, then divide by 2,000 lb per short ton.

Material Pounds per cubic yard Tons per cubic yard
Gravel, loose and dry 2,565 1.28
Crushed limestone 2,625 1.31
Crushed granite 2,778 1.39
Sand, dry and loose 2,700 1.35
Pit-run gravel 3,240 1.62

These are Nevada DOT’s loose weights, listed for estimating. Wet material is heavier and compacted material fits more weight in the same space, so ask your supplier how they convert yards to tons for your stone.

Should you buy bags or bulk?

Bags suit small beds and top-ups, and bulk delivery suits anything measured in yards. A cubic yard is 27 cubic feet, so it takes 13.5 bags of 2 cubic feet or 9 bags of 3 cubic feet. Bulk needs a place to drop the pile and a wheelbarrow. We publish no prices, so compare local quotes per cubic yard, including delivery fees.

What depth do you need for each use?

Depth comes from the job, and the product’s label has the final say.

One cubic yard covers 324 ÷ depth in inches square feet: 108 sq ft at 3 inches, or 162 sq ft at 2 inches.

Worked example 1: a 100 sq ft mulch bed

  1. Volume: 100 × 3 ÷ 12 = 25 cu ft
  2. With 10 percent: 25 × 1.10 = 27.5 cu ft
  3. Cubic yards: 27.5 ÷ 27 = 1.02 cu yd
  4. 2 cu ft bags: 27.5 ÷ 2 = 13.75, so 14 bags
  5. 3 cu ft bags: 27.5 ÷ 3 = 9.17, so 10 bags

Worked example 2: gravel for a 200 sq ft path

  1. Volume at 4 inches: 200 × 4 ÷ 12 = 66.7 cu ft
  2. With 10 percent: 73.3 cu ft = 2.72 cu yd
  3. Weight at 2,565 lb per cubic yard: 2.72 × 2,565 = 6,967 lb
  4. Tons: 6,967 ÷ 2,000 = 3.48 tons

How do you order and spread it?

Order the cubic yards with your allowance, tell the supplier the depth and area, and ask for the tons if they sell by weight. Gravel settles under a compactor and traffic, so a base needs extra over a loose-fill estimate. If the project starts with a slab, size the pour with the concrete formulas, and for retaining walls see the retaining wall guide, which covers the drainage stone behind the wall.

Questions we get

How deep should mulch be?

Follow the product label. Scotts says a 2 inch layer of its Nature Scapes mulch creates a weed barrier, and Texas A&M AgriLife Extension's worked example uses 3 inches. Run your numbers at both depths to see the difference in bags. A thicker layer costs more, so work out both depths before you buy.

How many cubic feet are in a cubic yard?

A cubic yard is 27 cubic feet, from 3 ft times 3 ft times 3 ft. Bags are sold in cubic feet, so divide 27 by the bag size: 13.5 bags of 2 cubic feet or 9 bags of 3 cubic feet make a yard. Texas A&M AgriLife Extension rounds the 2 cubic foot case up to 14 bags.

How many tons of gravel are in a cubic yard?

It depends on the stone. Nevada DOT's table lists loose, dry gravel at 2,565 lb per cubic yard (1.28 tons), crushed limestone at 2,625 lb, crushed granite at 2,778 lb and pit-run gravel at 3,240 lb. The DOT says its figures are for estimating, and wet material weighs more, so ask your supplier for the weight of the stone you are buying.

Is topsoil sold by the yard or the ton?

Both are used, depending on the supplier. Mulch and topsoil are usually sold by volume in bags or cubic yards, and their weight changes a lot with moisture, so we do not publish a density for them. Get the cubic yards from the formula, then ask the supplier how they convert to tons if they sell by weight.

How much do I need for a 10 x 10 ft bed?

A 10 x 10 ft bed with 3 inches of mulch is 100 x 0.25 = 25 cubic feet, or 0.93 cubic yards, which Texas A&M AgriLife Extension rounds up to 1 yard. With a 10 percent allowance it is 27.5 cubic feet: 14 bags of 2 cubic feet or 10 bags of 3 cubic feet. At 2 inches deep it is two-thirds of that.

Where we got this

  1. Texas A&M AgriLife Extension, Travis County: How Much Compost, Soil or Mulch? (formula, 27 cubic feet per yard, bags) (travis-tx.tamu.edu)
  2. Nevada Department of Transportation, Table A.2-8: weights of aggregates and sand (lb per cubic yard) (dot.nv.gov)
  3. NIST SP 811, Appendix B.8: ton, short = 2000 lb (nist.gov)
  4. ScottsMiracle-Gro, Scotts Nature Scapes Triple Shred Mulch: 2 inch weed-barrier rate (scottsmiraclegro.com)

Keep reading

Return to top